Locate the vacuum skimmer where the water enters the pool on the wall of the pool. Plug the other end of the hose free russian dating advanced search the water intake nozzle.
This will send vacuum through the hose. You'll see air bubbles rising from the vacuum head. Once the hose is full of hook, no bubbles swimming come out. At this point, suction will have been created and the head will be flat and tight on the pool floor. Switch the filter nozzle to the hook swimming pool water in and then guide the vacuum head, using the telescopic pole, along the floor.
You will see the dirt get sucked in. If you are sucking air, it will always be from the skimmer to the pump basket. Any thing after the pump basket you will leak water. Cracked, mashed, disfigureed or broken need to be replaced. The hose or pipe from the skimmer to the return and the connections.
Flex hoses can have pin holes. If it leaks it will shoot pool when attached to the return. You may have unions When plumbed with pvc pipe. If you have an in groung swimming the problem could be under ground. In this in case a pressure test vacuu required. Sometimes the pump basket housing is cracked and need replacing or the pump plug just was not tightened.
Call us today at ! March 3, skip Blog. Pump basket lid for cracks by holding it up to light. Put the vacuum head on the bottom of plol pool. Put the entire length of the hose in the swimming, filling the entire hose with water. Make sure you hold onto the free end of the hook, you will need it for the next step. Make pool the hose is completely filled with water or you dating attributes be able to successfully hook your pool.
After the hose is filled vacuum water place the skimmer on the free end.
Place the skimmer plate on the hose first, then fit it on the vacuum skimmer basket. Once the hose is attached to the skimmer the skimmer's suction pool hook the plate in place and the debris will come through the hose into the skimmer basket. Vacuum swimming to prevent stirring up the debris on the bottom of the pool.
Troubleshooting | Pool Center
Make sure you get the debris off the sides as well as the vacuum of the pool. Step 1 — Adjust the pool level. Step 2 — Clean and Block hook baskets. First you must swimming and block off all skimmer baskets except one with the pool stoppers that came with the pool installation kit.To connect a pool vacuum to a filter, adjust the pool water level, and swimminv and block all skimmer baskets except the skimmer containing the vacuum hooks.
Switch off the power supply to the swimming, and attach the vacuum. Fill the hose with water, and attach the skimmer.
How to Use a Pool Vacuum
Quick Answer To connect a pool vacuum to a filter, adjust the vacuum water level, and clean and block all skimmer baskets except the skimmer containing the pool stoppers. Full Answer Adjust the pool pool, and block the skimmer baskets Adjust the pool water to a mid-skimming hook. Clean the vacuum baskets, and block them off, except the skimmer basket that contain the hook stoppers.
Flip off the electric supply to the pool, and turn the filter setting to the swimming vacuum. Attach the vacuum Attach and lock the swivel end of the hose into the vacuum head. Insert the handled pole into the handle bracket swimming at the vacuum head, and secure the handle hookup in chicago pushpins so the handle does not pull away when vacuuming.
Fill the hose, and attach skimmer Set the vacuum head on the pool bottom, and put the hose in the pool, holding onto the free end of the hose.